86-527-80702885
West 205 National Road, South Bangyuan Road, Shuyang County Economic Development Zone, Suqian, Jiangsu, China (Mainland)
Production Process
Available Specifications and Sizes
| Application Stardard | JIS G 3303, EN 10202, ASTM A623/624 | |
| Black plate | SR | DR |
| Normal thickness(mm) | 0.17-0.50 | 0.15-0.38 |
| Normal With(mm) | 700-1030 | 700-960 |
| Length(Sheet) (mm) | 601-1200 | 601-1200 |
| Steel grade | MR, SPCC | |
| Temper grade | T-1 T-2 T-2.5 T-3 T-3.5 T-4 T-5 | DR-7M DR-8 DR-8M DR-9 |
| Coating Weifht | 1.1-5.6(g/M2) for tinning | |
| Surface Finish | B(Bright) R(Stone) S(Sliver) | |
| Surface Treatment | Passivation 311 | |
| Annealing | BA | |
| Oiling | DOS(2-20mg/M2) | |
| Max outer diameter(mm) | 508 | |
| Weight Range(MT) | 3-10(for coil), 1.5-2(for sheets) | |
| - | YOUFU GB/T2520-2008 | JIS G3303:2008 | ASTM A623M-08 | DIN EN 10202:2001 | ISO 11949:1995 | GB/T 2520-2000 |
|---|---|---|---|---|---|---|
| (SR) | - | T-1 | T-1 (T49) | TS230 | TH50+SE | TH50+SE |
| T-2 | T-2 | T-2 (T53) | TS245 | TH52+SE | TH52+SE | |
| T-2.5 | T-2.5 | - | TS260 | TH55+SE | TH55+SE | |
| T-3 | T-3 | T-3 (T57) | TS275 | TH57+SE | TH57+SE | |
| T-3.5 | - | - | TS290 | - | - | |
| T-4 | T-4 | T-4 (T61) | TH415 | TH61+SE | TH61+SE | |
| T-5 | T-5 | T-5 (T65) | TH435 | TH65+SE | TH65+SE | |
| DR | DR-7M | - | DR-7.5 | TH520 | - | - |
| DR-8 | DR-8 | DR-8 | TH 550 | T550+SE | T550+SE | |
| DR-8M | - | DR-8.5 | TH580 | T580+SE | T580+SE | |
| DR-9 | DR-9 | DR-9 | TH620 | T620+SE | T620+SE |
| Surface Finish | Characteristics | Code |
|---|---|---|
| Bright surface | Glazed surface obtained after melting treatment of electro tinned smooth rawmaterial strip with extremely fie stone figures by processing | B |
| Stone surface | Glazed surface obtained after melting treatment of electro-tinned raw material strip featuring certain oriented stone figures. | R |
| Silver surface | Glazed surface obtained after melting treatment of electro-tinned raw material strip with rough matt surface. | S |
If no engagement, tinplate are electro statically oiled with DOS(2~20mg/M2) .
Temper Rolling Leveling
ETP Cutting
